Bartoline Ready To Use Instant Filler Tube
(0)Rating, 0.0 out of 5 from 0 reviews.
330g £1.52 per 100g
£5.00
Promotions
You might also like...
Product Information
Description
Ready to use instant filler is suitable for interior and exterior use. Ideal for repairs to plaster, plasterboard, brick, wood and stone. Easy to use and sand down. Dries white.
Ready to use instant filler is suitable for interior and exterior use. Ideal for repairs to plaster, plasterboard, brick, wood and stone. Easy to use and sand down. Dries white.
Country Of Origin
England
Brand
Bartoline
Return To Address
Bartoline Limited,
Barmston Close,
Beverley,
England.,
HU17 0LW.
Tel: 01482 678710
www.bartoline.co.uk
Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.
Tel: +353212066441
www.bartoline.eu
Barmston Close,
Beverley,
England.,
HU17 0LW.
Tel: 01482 678710
www.bartoline.co.uk
Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.
Tel: +353212066441
www.bartoline.eu
Features
Dries white, Easy to sand, Interior and exterior
Package Type
Tube
Manufacturer
Bartoline Limited,
Barmston Close,
Beverley,
England.,
HU17 0LW.
Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.
Barmston Close,
Beverley,
England.,
HU17 0LW.
Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.
Storage
Protect from frost
Other Information
Storage:
Protect from frost
Safety Warning:
HEALTH & SAFETY
Contains preservatives to control microbial deterioration: Reaction mass of 5-chloro-2-methyl-4-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1); 3-iodo-2-propynyl butylcarbamate, 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one and bronopol. May produce an allergic reaction. Keep out of reach of children. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Protect from frost
Safety Warning:
HEALTH & SAFETY
Contains preservatives to control microbial deterioration: Reaction mass of 5-chloro-2-methyl-4-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1); 3-iodo-2-propynyl butylcarbamate, 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one and bronopol. May produce an allergic reaction. Keep out of reach of children. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Preparation And Usage
Preparation
Ensure surfaces to be filled are clean, dry and dust free. Cover nails and screw heads with an oil-based primer to prevent rusting.
Directions
Work the tube well between fingers. Remove cap and cut off tip of nozzle at a 45° angle, gently squeeze product. Into area to be filled and level with a filling knife or scraper.
Once dry, smooth with sandpaper. In larger areas, apply filler in layers of no more than 6mm thick, allowing each layer to set before applying the next. If used on exposed outside surfaces seal filler with an oil-based paint.
Protect from rain and water until sealed.
Do not use on surfaces regularly under water.
Cleaning & storage
Clean tools with water before filler sets hard. After use, ensure cap is firmly replaced.
Ensure surfaces to be filled are clean, dry and dust free. Cover nails and screw heads with an oil-based primer to prevent rusting.
Directions
Work the tube well between fingers. Remove cap and cut off tip of nozzle at a 45° angle, gently squeeze product. Into area to be filled and level with a filling knife or scraper.
Once dry, smooth with sandpaper. In larger areas, apply filler in layers of no more than 6mm thick, allowing each layer to set before applying the next. If used on exposed outside surfaces seal filler with an oil-based paint.
Protect from rain and water until sealed.
Do not use on surfaces regularly under water.
Cleaning & storage
Clean tools with water before filler sets hard. After use, ensure cap is firmly replaced.
Customer reviews
Overall ratings
Average 0.0 out of 5, based on 0 reviews.Breakdown of ratings
0 reviewers rated 5 out of 5.0 reviewers rated 4 out of 5.0 reviewers rated 3 out of 5.0 reviewers rated 2 out of 5.0 reviewers rated 1 out of 5.