H G Bathroom Mould Spray

HG mould spray destroys all moulds immediately and easily. It is a self-acting cleaner that deals quickly and effectively with unhealthy black mould stains. These dirty black mould, damp or mildew stains often occur on the silicon seals between the bathtub and the tiled wall, in the shower cubicle or on plaster. This produces black stains that are bad for your health. HG mould spray removes these stains quickly and easily. Suitable for tile and silicon joints, plasterwork, etc.

Netherlands

HG

HG Hagesan (UK) Ltd,
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.
Tel.: +44 (0) 1206 822 744

Contains a.o: Anionic Surfactans, Chlorine-Based Bleaching Agents <5%

Destroys the most stubborn mould, For tile grout, silicone joints, plaster etc, Result within 30 minutes, Self-acting

Pump

Product and tips? See: HG.eu
Consumer Services? Call: +44 (0)1279 598360

Made by:
HG International b.v.,
Damsluisweg 70,
1332 EJ Almere,
The Netherlands.

Transport and store cool, dark and in an upright position.

Safety Warning:
Attention: We recommend you to ventilate well during use and to weare rubber/plastic gloves. Prevent splashes on clothing, paintwork and vertical blinds. Rinse with water immediately in case of contact with metals such steel. Do not treat coloured surfaces. We do not recommend the use of this product on ceilings. In elastic grouting (for instance silicone paste) sometimes some permanently brown discolouration may occur after use. In badly glazed tiles and old tiles with hairline cracks brown be removed with Hypo (Sodium thiosulfate), which can be obtained from your costumer service department. Do not reuse the bottle. Transport and store cool, dark and in an upright position.

Medical personnel can request the data sheet via +31 36 54 94 777
The consumer's information sheet can be obtained via www.hg.eu

WARNING H315- Causes skin irritation. H319- Causes serious eye irritation. H400- Very toxic to aquatic life. EUH206- Warning! Do not use together with other products. May release dangerous gases (chlorine). P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P264- Wash hands thoroughly after handling. P273- Avoid release to the environment. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313- If eye irritation persists: Get medical
advice/attention.

Importer:
HG Hagesan (UK) Ltd,
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.

Additional Information:
German Consumer Test Institute

Directions for use: Remove the locking clip before use. The product has a bleaching action. If in doubt, first test on an inconspicuous area or a discreet place. Do not remove fungi and algae before using the product. Press the nozzle at the from side and turn a quarter. Spray the surface from 3 - 5 cm distance and leave it to work for 30 minutes. Clean the sprayed surface with sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and be treated again. Turn the nozzle quarter backwards after use (blocking position). For cleaning large surfaces with green deposits, we advice HG algae mould remover.