Skip to contentSkip to searchSkip to footer
Checkout
Total number of items in your trolley 0. Trolley amount £0.00.Minimum: £25.00

You might also like...

Product Information

Sets in 5 min.‡
‡Set time varies with volume of material and application temperature.

Water Resistant*
*Not recommended for continuous submersion or below-waterline use.

Bonds:
- Metal
- Plastics†
- Ceramic
- Wood
- Glass
- and more!
†Not recommended for use on polyethylene or polypropylene plastics.

For the Toughest Jobs on Planet Earth®
Withstand extreme temperatures
Resealable syringe
- Solvent resistant*
- Easy use

Country Of Origin

United States

Brand

Gorilla

Return To Address

Gorilla Glue Europe Ltd,
PO Box 663,
Chorley,
PR6 6PU,
UK.
Tel: +44 (0)843 507 1200

Features

Gap Filling, Incredibly Strong, 100% Tough, High strength holds 240kg/cm², Permanent, Strong & Durable

Package Type

Blister Pack

Further Description

Find more at gorillaglue.com

Manufacturer

Gorilla Glue Europe Ltd,
PO Box 663,
Chorley,
PR6 6PU,
UK.

Storage

To close, slightly pull back on plunger, wipe tip with a dry cloth and then replace cap tightly. Store in a cool, dry place away from children and animals.

Other Information

Full Product Name:
Gorilla Epoxy Resin and Hardener

Storage:
To close, slightly pull back on plunger, wipe tip with a dry cloth and then replace cap tightly. Store in a cool, dry place away from children and animals.

Safety Warning:
Gorilla Epoxy Resin and Hardener

Gorilla Epoxy (Hardener)
Contains: Poly[oxy(methyl-1,2-ethanediyl)], α-hydro-ω-hydroxy-, ether with 2,2-bis(hydroxymethyl)- 1,3-propanediol (4:1), 2-hydroxy-3-mercaptopropyl ether and 2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine.
CLP Regulation - Corrosion
CLP Regulation - Exclamation Point
DANGER: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long-lasting effects.

Gorilla Epoxy (Resin)
Contains: Bis-[4-(2,3-epoxipropoxi) phenyl]propane.
CLP Regulation - Exclamation Point
CLP Regulation - Environment
WARNING: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long-lasting effects.

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. Dispose of contents/container in accordance with local, state or national legislation.

Additional Information:
©2021 Gorilla Glue Europe Ltd.

Preparation And Usage

Directions
Prepare
All surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills.
Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.
1 Dispense & Mix
Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray. The package blister can be used as a mixing tray for the first use. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up - this is a reaction that occurs as the resin and hardener combine.
2 Apply
Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth.
3 Grip
To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes. Full cure achieved in 24 hours.
Bond set time: 5 Minutes to apply and position. Handling: 30 Minutes undisturbed. Full cure: 100% in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times.

Bond Set Time: 5 minutes to apply and position.
Handling: 30 minutes undisturbed.
Full Cure: 100% in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times.
Temperature Range: bond withstands -23°C to 82°C.
Cured Colour: dries clear.
Clean Up: remove excess glue immediately from project surface with dry cloth and acetone, mineral spirits or rubbing alcohol.

Customer reviews

Overall ratings

Average 5.0 out of 5, based on 1 reviews.

Breakdown of ratings

0 reviewers rated 5 out of 5.0 reviewers rated 4 out of 5.0 reviewers rated 3 out of 5.0 reviewers rated 2 out of 5.0 reviewers rated 1 out of 5.

Customer reviews, 0 total.