Skip to contentSkip to searchSkip to footer
Checkout
Total number of items in your trolley 0. Trolley amount £0.00.
Minimum: £25.00

Bartoline Ready To Use All Purpose Filler

(0)Rating, 0.0 out of 5 from 0 reviews.
600g £0.92 per 100g
£5.50

Promotions

You might also like...

Product Information

Description
Bartoline Ready to Use All Purpose Filler is suitable for interior and exterior use. Ideal for repairs to plaster, plasterboard, brick, wood, stone, etc. Easy to use and sand down, dries white.

Country Of Origin

England

Brand

Bartoline

Return To Address

Bartoline Limited,
Barmston Close,
Beverley,
England,
HU17 0LW.
Tel: 01482 678710
www.bartoline.co.uk

Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.
Tel: +353212066441
www.bartoline.eu

Features

Dries white, Easy to sand, Interior and exterior

Package Type

Tub

Manufacturer

Bartoline Limited,
Barmston Close,
Beverley,
England,
HU17 0LW.

Bartoline Ireland Limited,
Unit 3D,
North Point House,
North Point Business Park,
New Mallow Road,
Cork,
Ireland.,
T23 AT2P.

Storage

Protect from frost

Other Information

Storage:
Protect from frost

Safety Warning:
HEALTH & SAFETY
Contains preservatives to control microbial deterioration: Reaction mass of 5-chloro-2-methyl-4-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1); 3-iodo-2-propynyl butylcarbamate, 1,2-benzisothiazol-3(2H)-one, 2-methylisothiazol-3(2H)-one and bronopol. May produce an allergic reaction. Keep out of reach of children. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If sanding is necessary, avoid inhalation of dust. The use of dust mask is recommended.

Preparation And Usage

Directions
Ensure surfaces to be filled are clean, dry and dust free. If necessary, stir filler before use. In larger areas, apply filler in layers no more than 6mm thick, allowing each layer to set before applying the next. Fill slightly proud of surrounding surface and when fully set sand down to a fine finish. When used outdoors seal the filler with an oil-based paint, protect the filled area from rain and water until sealed. Do not use on surfaces regularly under water.

Cleaning
After use, ensure lid is firmly replaced. Clean tools with water before filler sets hard.

Customer reviews

Overall ratings

Average 0.0 out of 5, based on 0 reviews.

Breakdown of ratings

0 reviewers rated 5 out of 5.0 reviewers rated 4 out of 5.0 reviewers rated 3 out of 5.0 reviewers rated 2 out of 5.0 reviewers rated 1 out of 5.

Customer reviews, 0 total.