- Beer, Wines & Spirits
- Vaping & Tobacco
- Accessories
- Lighters & Matches
- Swan Refillable Lighter
Swan Refillable Lighter
£1.25
This product is age restricted to 18 years or over
You'll be asked to confirm that you are over 18 on delivery.
Product information
Storage
Never expose to heat above 50°C or to prolonged sunlight.
Preparation and Usage
Warning: Contains flammable gas under pressure.
Use with care. Ignite lighter away from face and clothing. Never puncture or put in a fire. Be sure flame is out after use.
How to refill your Swan Lighter.
Refill away from flame or ignition source. Allow any spilt gas to evaporate and disperse before using the lighter. 1. Select appropriate nozzle by checking your lighter against the list on the can and shake can to check it contains fuel. 2. Pull out flint wheel from the top of the lighter. 3. Hold lighter upside down in hand and hold can upside down over lighter, i.e. nozzle down. 4. Push nozzle firmly into lighter filling valve, as far as it will go. Hold it steady for several seconds. Escaping liquid indicates that the lighter is full. 5. Replace flint holder, making sure the ridge on the barrel fits the groove of the lighter. Wait 30 seconds before striking lighter.
How to reflint your Swan Lighter.
1. Pull out flint wheel from top of lighter. 2. Remove spring by unscrewing grey cap. 3. Place new flint in barrel, holding it in a downward position. 4. Replace spring by pushing in and screwing on grey cap. 5. Replace flint holder, making sure the ridge on the barrel fits the groove on the lighter.
Use with care. Ignite lighter away from face and clothing. Never puncture or put in a fire. Be sure flame is out after use.
How to refill your Swan Lighter.
Refill away from flame or ignition source. Allow any spilt gas to evaporate and disperse before using the lighter. 1. Select appropriate nozzle by checking your lighter against the list on the can and shake can to check it contains fuel. 2. Pull out flint wheel from the top of the lighter. 3. Hold lighter upside down in hand and hold can upside down over lighter, i.e. nozzle down. 4. Push nozzle firmly into lighter filling valve, as far as it will go. Hold it steady for several seconds. Escaping liquid indicates that the lighter is full. 5. Replace flint holder, making sure the ridge on the barrel fits the groove of the lighter. Wait 30 seconds before striking lighter.
How to reflint your Swan Lighter.
1. Pull out flint wheel from top of lighter. 2. Remove spring by unscrewing grey cap. 3. Place new flint in barrel, holding it in a downward position. 4. Replace spring by pushing in and screwing on grey cap. 5. Replace flint holder, making sure the ridge on the barrel fits the groove on the lighter.
Preparation and Usage
Warning: Contains flammable gas under pressure.
Use with care. Ignite lighter away from face and clothing. Never puncture or put in a fire. Be sure flame is out after use.
How to refill your Swan Lighter.
Refill away from flame or ignition source. Allow any spilt gas to evaporate and disperse before using the lighter. 1. Select appropriate nozzle by checking your lighter against the list on the can and shake can to check it contains fuel. 2. Pull out flint wheel from the top of the lighter. 3. Hold lighter upside down in hand and hold can upside down over lighter, i.e. nozzle down. 4. Push nozzle firmly into lighter filling valve, as far as it will go. Hold it steady for several seconds. Escaping liquid indicates that the lighter is full. 5. Replace flint holder, making sure the ridge on the barrel fits the groove of the lighter. Wait 30 seconds before striking lighter.
How to reflint your Swan Lighter.
1. Pull out flint wheel from top of lighter. 2. Remove spring by unscrewing grey cap. 3. Place new flint in barrel, holding it in a downward position. 4. Replace spring by pushing in and screwing on grey cap. 5. Replace flint holder, making sure the ridge on the barrel fits the groove on the lighter.
Use with care. Ignite lighter away from face and clothing. Never puncture or put in a fire. Be sure flame is out after use.
How to refill your Swan Lighter.
Refill away from flame or ignition source. Allow any spilt gas to evaporate and disperse before using the lighter. 1. Select appropriate nozzle by checking your lighter against the list on the can and shake can to check it contains fuel. 2. Pull out flint wheel from the top of the lighter. 3. Hold lighter upside down in hand and hold can upside down over lighter, i.e. nozzle down. 4. Push nozzle firmly into lighter filling valve, as far as it will go. Hold it steady for several seconds. Escaping liquid indicates that the lighter is full. 5. Replace flint holder, making sure the ridge on the barrel fits the groove of the lighter. Wait 30 seconds before striking lighter.
How to reflint your Swan Lighter.
1. Pull out flint wheel from top of lighter. 2. Remove spring by unscrewing grey cap. 3. Place new flint in barrel, holding it in a downward position. 4. Replace spring by pushing in and screwing on grey cap. 5. Replace flint holder, making sure the ridge on the barrel fits the groove on the lighter.
Package Type
Box
Other Information
Full Product Name:
Lighters Silver & Black
Storage:
Never expose to heat above 50°C or to prolonged sunlight.
Safety Warning:
Keep out of the reach of the children.
Additional Information:
Lighters
Child Resistant.
ISO 9994.
Lighters Silver & Black
Storage:
Never expose to heat above 50°C or to prolonged sunlight.
Safety Warning:
Keep out of the reach of the children.
Additional Information:
Lighters
Child Resistant.
ISO 9994.
Brand
Swan
New silky black & smooth silver grip.
Your Swan lighter is both refillable and reflintable. Use only Swan lighter gas and Swan flints to ensure that your lighter continues to give good performance.
Your Swan lighter is both refillable and reflintable. Use only Swan lighter gas and Swan flints to ensure that your lighter continues to give good performance.
Manufacturer
House of Swan,
Sword House,
Totteridge Road,
High Wycombe,
HP13 6EJ.
Sword House,
Totteridge Road,
High Wycombe,
HP13 6EJ.
Return To Address
For further information about Swan lighters and Swan smokers' requisites range please contact:
House of Swan,
Sword House,
Totteridge Road,
High Wycombe,
HP13 6EJ.
House of Swan,
Sword House,
Totteridge Road,
High Wycombe,
HP13 6EJ.
Categories
Ratings and reviews
No reviews, yet. Why not be the first?